Search

Tel:  +86 731-88315979

Fax: +86 731-88440976

Skype: info@kiloview.com

Email:info@kiloview.com

Ads:188#, Middle Huanbao Rd Yuhua District, Changsha,China

Search

Contact

Copyrights All Reserved :Changsha Kiloview Electronics Co.,Ltd. License No:湘ICP备14007359号-1      后台登录

Services

>
FAQ
>
After powered on, PWR indicator is flashing

After powered on, PWR indicator is flashing

Page view
After powered on, the encoder's POWER indicator should be always on. If PWR indicator flashes, please check the power adapter firstly:
(1) Whether it is the original power adapter of the device;
(2) Check the voltage standard. Our encoder supports a wide 12V~24V DC input range, but it is recommended to use a 12V DC input.
(3) Whether the output power meets the requirements of the encoder. The encoder's maximum power (full negative) is 7-8W.
 
If the power adapter is ok, but PWR indicator is still flashing, it may be caused by the device failure or illegal repair. Please contact the manufacturer or supplier for repair or replacement.