Search

Tel:  +86 731-88315979

Fax: +86 731-88440976

Skype: info@kiloview.com

Email:info@kiloview.com

Ads:188#, Middle Huanbao Rd Yuhua District, Changsha,China

Search

Contact

Copyrights All Reserved :Changsha Kiloview Electronics Co.,Ltd. License No:湘ICP备14007359号-1      后台登录

Services

>
FAQ
>
LINK indicator is flashing or off

LINK indicator is flashing or off

Page view
It is normal when LINK indicator is flashing (or off) at the time of the encoder powered on within one minute. After the encoder is successfully enabled, the LINK indicator is always on, otherwise off.
 
IF the LINK indicator is off, please check the network connection and device startup.
 
If the LINK indicator is always flashing, it may due to the failure of the device. How to detect the failure: you can try to Ping the IP address of THE encoder, or use the WEB browser to open the management interface of the encoder. If they can Ping through, or WEB access is normal, then the encoder is normal; otherwise the encoder is failure, please contact the manufacturer or reseller for repair.